Feddersen Bronze Nickel Alloy 10/22 Receiver Review
Many of your know Feddersen from my numerous articles noting the mind blowing accuracy of his 10/22 barrels and also a review of his stunning Bronze Alloy 10/22 billet receiver I reviewed about a year ago. To catch everyone up in the event you have not read the above linked article, this building included: - Feddersen 10/22 Receiver
- Kidd 1.5-lb Single Stage Trigger Unit
- Feddersen 16.25” Fluted Bull Barrel - Muzzle Threaded
- Kidd Charging Handle
- Kidd Match Bolt
- Victor Titan Stock
- The orignal Nikon 3-9 ProStaff scope worked well, but was not able to really allow this gun to stretch its legs beyond 75-yards accurately... yes beyond 75-yards.
I will save you the scroll ahead. This rig delivers sub-1" groups at 125-yards if I do my part. See attached 125-yard group with CCI Velocitor ammo. This is great news and allows me to not worry about my zero changing all while still delivered very tiny .116-inch 5-shot 50-yard groups with Lapua Center-X. Insane accuracy. I love this gun.
SHOOTING AWAY AN AFTERNOON
I will save you the scroll ahead. This rig delivers sub-1" groups at 125-yards if I do my part. See attached 125-yard group with CCI Velocitor ammo. This is great news and allows me to not worry about my zero changing all while still delivered very tiny .116-inch 5-shot 50-yard groups with Lapua Center-X. Insane accuracy. I love this gun.
SHOOTING AWAY AN AFTERNOON
 |
| 1-inch squares still seem a little large for the precision of this rifle even at 125-yards |
I had decided to swap to a Lucid L5 4-16 optic with parallax adjustment and a very nice fine detailed BDC reticle design. Really more than anything I wanted a very fine reticle and also wanted the BDC so I could quickly snap shots of various ranges. The Lucid 4-16 did that beautifully.
At this point I know that I am zero'ed at 50-yards with SKPlus Standard two hashes down for 75-yards, four hashes down for 100-yards, and six for 125-yards. It really is pretty handy and the precision is close enough to minute of rodent hits. Super precision is just a click of two off from those reference points.
I have Kidd, Volquartsen, Tacitacl Solutions, Clark, Stock, Whistlepig, and even Force, but time and time again the Feddersen barrels are just problem free with ammo, consistant, and super easy to just pull a SwabIt through the bore and be done. Obviously the accuracy does not suck either. This is an 1/8" gun at 50-yards with the right ammo. The prefered subsonic ammo just cannot hold it together like a hyper velocity round like the CCI Velocitor which the Feddersen loves.
ABOUT FEDDERSEN
The company is known by many names; Feddersen, R4, 1022rifle.com, and Gunbarrels.net. Feddersen is a name people in the industry know very well. The company was founded in 1979 by Fred Feddersen and has become rather famous for his world record breaking patented R4 SIPR .50 BMG gun barrels. Fred prides himself on offering the straightest bores in the industry all thanks to his patented process and machines. Each and every step of their in house barrel production is unique and in fact their entire process is patented and a trade secret process.Unlike many barrel or firearms manufacturers, Feddersen is not buying pre-rifled blanks and just finishing them to their own specs, they are producing 100% of their barrels in house from solid round bar stock. They have a special drilling process, a patented ultra-sensitive lapping/honing process, unique patented and proprietary SEPR - Single Edged Polygonal Rifling, and one of the few companies in the world which offer a barrel with near perfect centricity and straightness between the bore and profile.
Amazingly enough their 10/22 barrels start at only $145, The voodoo that Fred’s patented design and trade secret process delivers superb accuracy which rivals the best barrels anywhere. The 10/22 is a pet project of Fred and he continues to deliver new products for the platform including a wide variety of barrels including take-down models and also these receivers.
THE FEDDERSEN BRONZE NICKEL ALLOY 10/22 RECEIVER
Fred offers the receivers in two bronze alloys and aluminum versions. Fred decided on a high bronze content alloy to deliver several advantages.
The bronze nickel based alloys are considerably heavier than aluminum which delivers a stiffer and more substantial feeling 10/22 build which in turn should deliver improved accuracy. The Feddersen Bronze Nickel 10/22 receiver is also naturally slick and for the most part self lubricating. I can tell you that the Kidd Innovations Match bolt glides back and forth like it is on bearings - it is amazingly smooth.Feddersen integrated an extended 1913 spec picatinny rail into the receiver. Another notable feature is the barrel trunnion v-block area is spec-ed to precisely fit a .920 bull barrel profile, so instead of a gap around the barrel, the trunnion actually provides support to assure there is no barrel droop without any special mounting requirements.
AVAILABLE FEDDERSEN 10/22 RECEIVER MODELS
Feddersen now are in full production of the 10/22 receivers in Bronze Alloy, Bronze Nickel Alloy, and Aluminum billets versions. The Bronze Alloy Nickel Alloy are $350 retail, this silver colored Nickel Bronze Alloy $375, and Aluminum $275 billets versions. All are available on his site - https://www.1022rifle.com
ACCURACY
The Feddersen barrels alone deliver stunning sub-¼-inch 50-yard accuracy which deliver tricks such as like slicing cards at 25 to 50 yards with the right ammo. The receiver did indeed tighten up my groups even further compared to factory receivers. For this build I choose a 16.5-inch fluted bull barrel with threaded muzzle to use suppressed. A Kidd Innovations match bolt, 1.5-lb single stage trigger, and V-block were used to complete the build along with a Victor Titan stock and Nikon 3-9 ProStaff optic with adjustable objective.
My a point of impact did not change when suppressed at 50-yards with my favorite SK Standard Plus round with my AAC Ti-Rant suppressor installed or removed.
FINAL THOUGHTSThe Feddersen 10/22 receiver is something unique, delivers many features expected of top tier receivers plus the slippery benefits of bronze and the full support of a trunnion v-block area. The raw material look of the bronze alloy is also unique as nearly every other 10/22 receiver is aluminum and colored with some type of anodizing. I like there there is another high end receiver option for 10/22 builders to choose from beyond the typical options such as Kidd, Volquartsen, and Tactical Innovations. What I liked most from this receiver was that it delivered a solid tight beefy-ness to the build that no other receiver offers and with that the potential for improved accuracy - I am certainly thrilled with .116-inch 50-yard groups.
SPECS
Nickel Bronze Alloy $375 retail
BUILD SPECS
Feddersen 10/22 Receiver
Kidd 1.5-lb Single Stage Trigger Unit
Feddersen 16.25” Fluted Bull Barrel - Muzzle Threaded
Kidd Charging Handle
Kidd Match Bolt
Victor Titan Stock
Nikon 3-9 ProStaff scope
FJ Feddersen, Inc. - http://www.1022rifle.com/
Kidd Innovative Designs - https://www.coolguyguns.com
Victor Titan - http://www.victorcompanyusa.com
Nikon - http://www.nikonsportoptics.com/